CPm 170M - 1.5 HP single-phase centrifugal electric pump
Flow rate up to 160 l/min (9.6 m³/h). Head up to 36 m. 1.1 kW (1.5 HP) motor.
The Pedrollo CPm 170M electric pump is particularly recommended for water supply activities, for air conditioning or cooling systems and for irrigation.
Thanks to its simplicity and reliability, it is recommended for use in the civil sector but can also be used in agricultural and industrial contexts.
It can pump clean water and liquids that are chemically non-aggressive for the constituent materials.
The CPm 170M, despite its simplicity, is a reliable product that will stand the test of time. Pedrollo used materials such as cast iron and stainless steel to make the pump robust and durable.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 7.8
- Capacitor
- 25 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 30
- Max. flow rate (l./min.)
- 160
- Min. head (m.)
- 19
- Max. head (m.)
- 36
- Jobs
- air conditioning systems
cooling systems
irrigation
pressurization systems
tank transfer
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 26
- Width (cm)
- 36.7
- Depth (cm)
- 206
- Weight (Kg)
- 17.8
- Warranty (years)
- 2
CPm models and performances
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 170-170M

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



