CP 200-ST6 - 3 HP three-phase stainless steel centrifugal electric pump
Made of AISI 316L stainless steel. Flow rate up to 270 l/min (16.2 m³/h). Head up to 45 m. 2.2 kW (3 HP) motor.
The CP 200-ST6 centrifugal electric pump from the CP-ST series by Pedrollo is designed to avoid corrosion damage or prevent the formation of rust.
Pedrollo has made the electric pump entirely of stainless steel to ensure maximum strength and durability.
The pump body and impeller are made of AISI 304 stainless steel and the motor shaft is made of AISI 431 stainless steel.
To ensure maximum hygiene, Pedrollo has made all the components of the CP 200-ST6 that come into contact with water in AISI 304 stainless steel.
Recommended for use in agricultural, domestic, and industrial sectors. The CP 200-ST6 can pump clean water and chemically non-aggressive liquids for pump components.
The pump flow rate ranges from 10 to 270 litres per minute and the head from 18 to 45 metres.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Absorption at 230V (A)
- 8.8
- Current consumption at 400V (A)
- 5.1
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 270
- Min. head (m.)
- 18
- Max. head (m.)
- 45
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 23.75
- Width (cm)
- 39
- Depth (cm)
- 24.4
- Weight (Kg)
- 19.7
- Warranty (years)
- 2
CP-ST6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 170-170M-180-190-200-ST6

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
| 2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
| 3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



