CP 180-ST6 - 1.5 HP three-phase stainless steel centrifugal electric pump
Made of AISI 316L stainless steel. Flow rate up to 230 l/min (13.8 m³/h). Head up to 31.5 m. 1.1 kW (1.5 HP) motor.
The Pedrollo CP 180-ST6 centrifugal electric pump boasts a solid and robust construction.
Pedrollo has created a product entirely in stainless steel. The pump body is made of AISI 304 stainless steel and the shaft is made of AISI 431 stainless steel.
To ensure total hygiene and maximum corrosion resistance, all components in contact with the pumped liquid are made of AISI 304 stainless steel.
The CP 180-ST6 is recommended for use in the domestic, agricultural and industrial sectors.
It can pump clean water and liquids that are chemically non-aggressive for the pump materials.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.7
- Current consumption at 400V (A)
- 3.3
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 55
- Minimum flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 230
- Min. head (m.)
- 13
- Max. head (m.)
- 31.5
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- 90
- Motor voltage
- 230 V
400 V - Height (cm)
- 23.75
- Width (cm)
- 36.8
- Depth (cm)
- 24.5
- Weight (Kg)
- 15.7
- Warranty (years)
- 2
CP-ST6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 170-170M-180-190-200-ST6

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
| 2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
| 3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



