CPm 170M-ST6 - 1.5 HP single-phase stainless steel centrifugal electric pump
Made of AISI 316L stainless steel. Flow rate up to 160 l/min (9.6 m³/h). Head up to 36.5 m. 1.1 kW (1.5 HP) motor.
The Pedrollo CPm 170M-ST6 centrifugal electric pump can pump clean water and liquids that are chemically non-aggressive towards the materials from which the pump is made.
Recommended for use in the domestic, agricultural and industrial sectors.
The pump flow rate ranges from 10 to 160 litres per minute and the head from 19 to 36.5 metres.
The CPm 170M-ST6 is made entirely of stainless steel for greater robustness.
The pump body and impeller are made of AISI 304 stainless steel and the shaft is made of AISI 431 stainless steel.
For total hygiene and to ensure maximum resistance to corrosion, all components in contact with the pumped liquid are made of AISI 304 stainless steel.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 7.8
- Capacitor
- 25 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 160
- Min. head (m.)
- 19
- Max. head (m.)
- 36.5
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 23.75
- Width (cm)
- 36.8
- Depth (cm)
- 24.4
- Weight (Kg)
- 14.5
- Warranty (years)
- 2
CPm-ST6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 170-170M-180-190-200-ST6

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
| 2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
| 3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



