CP 150-ST6 - 1 HP three-phase stainless steel centrifugal electric pump
Made of AISI 316L stainless steel. Flow rate up to 150 l/min (9 m³/h). Head up to 32 m. 0.75 kW (1 HP) motor.
The Pedrollo CP 150M-ST6 electric pump is recommended for pumping clean water and liquids that are chemically non-aggressive for the pump's components.
Due to its construction features, this centrifugal pump is recommended for use in the domestic, agricultural and industrial sectors.
The pump flow rate ranges from 10 to 150 litres per minute and the head from 14 to 32 metres.
The CP 150M-ST6 is made entirely of stainless steel. The pump body and impeller are made of AISI 304 stainless steel, and the motor shaft is made of AISI 431 stainless steel.
To ensure maximum hygiene and avoid problems related to corrosion of the components, Pedrollo has made all the components in contact with water in AISI 304 stainless steel.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 4.2
- Current consumption at 400V (A)
- 2.4
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 150
- Min. head (m.)
- 14
- Max. head (m.)
- 32
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 21.9
- Width (cm)
- 29.6
- Depth (cm)
- 22.1
- Weight (Kg)
- 10.7
- Warranty (years)
- 2
CP-ST6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 150-158-ST6

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
| 2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
| 3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



