CPm 130-ST6 - Single-phase stainless steel centrifugal electric pump, 0.50 HP
Made of AISI 316L stainless steel. Flow rate up to 100 l/min (6 m³/h). Head up to 22.5 m. 0.37 kW (0.50 HP) motor.
The Pedrollo CPm 130-ST6 centrifugal electric pump is recommended for use in the domestic, agricultural and industrial sectors.
The pump flow rate ranges from 10 to 100 litres per minute and the head from 9 to 22.5 metres.
The pump body can support a maximum pressure of 8 bar .
A special feature of the CPm 130-ST6 is that it is made entirely of stainless steel.
The pump body and impeller are made of AISI 304 stainless steel and the motor shaft is made of AISI 431 stainless steel.
All components in contact with the pumped liquid are made of AISI 304 stainless steel to guarantee total hygiene and maximum resistance to corrosion.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Absorption at 230V (A)
- 3
- Capacitor
- 10 µF 450 VL
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 316L stainless steel
- Impeller
- AISI 316L stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 316 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 100
- Min. head (m.)
- 9
- Max. head (m.)
- 22.5
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
- Height (cm)
- 6.55pm
- Width (cm)
- 26.6
- Depth (cm)
- 18.1
- Weight (Kg)
- 6.6
- Warranty (years)
- 2
CPm-ST6 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 100-130-132-ST6

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4404 stainless steel (AISI 316L) |
| 2.1 - Seal holder cover | EN 1.4404 stainless steel (AISI 316L) |
| 3.0 - Impeller | EN 1.4404 stainless steel (AISI 316L) |
| 4.0 - Pump shaft | EN 1.4404 stainless steel (AISI 316L) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



