CP 170-ST4 - 1.5 HP three-phase stainless steel centrifugal electric pump
Made of AISI 304 stainless steel. Flow rate up to 140 l/min (8.4 m³/h). Head up to 41 m. 1.1 kW (1.5 HP) motor.
The CP 170-ST4 centrifugal electric pump from the CP-ST series by Pedrollo is designed to avoid corrosion damage and prevent the formation of rust.
Pedrollo has made the electric pump entirely of stainless steel to ensure maximum strength and durability.
The pump body and impeller are made of AISI 304 stainless steel and the motor shaft is made of AISI 431 stainless steel.
To ensure maximum hygiene, Pedrollo has made all the components of the CP 170-ST4 that come into contact with water in AISI 304 stainless steel.
Recommended for use in agricultural, domestic, and industrial sectors. The CP 170-ST4 can pump clean water and chemically non-aggressive liquids for pump components.
The pump flow rate ranges from 10 to 140 litres per minute and the head from 20 to 41 metres.
- Motor connection
- THREE-PHASE
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 5.7
- Current consumption at 400V (A)
- 3.3
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 140
- Min. head (m.)
- 20
- Max. head (m.)
- 41
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 23.75
- Width (cm)
- 36.8
- Depth (cm)
- 24.5
- Weight (Kg)
- 14.5
- Warranty (years)
- 2
CP-ST4 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 170-170M-180-190-200-ST4

Bearings
| Pump side motor bearing | 6204 ZZ |
| Opposite side motor bearing | 6204 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-18 |
| LP diameter | 18 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |


