CP 158-ST4 - 1 HP three-phase stainless steel centrifugal electric pump
Made of AISI 304 stainless steel. Flow rate up to 120 l/min (7.2 m³/h). Head up to 36.5 m. 0.75 Kw (1 HP) motor.
The Pedrollo CP 158-ST4 centrifugal electric pump is recommended for use in the domestic, agricultural and industrial sectors.
The pump flow rate ranges from 10 to 120 litres per minute and the head from 19 to 36.5 metres.
The pump body can support a maximum pressure of 6 bar .
A special feature of the CP 158-ST4 is that it is made entirely of stainless steel.
The pump body and impeller are made of AISI 304 stainless steel and the motor shaft is made of AISI 431 stainless steel.
All components in contact with the pumped liquid are made of AISI 304 stainless steel to guarantee total hygiene and maximum resistance to corrosion.
- Motor connection
- THREE-PHASE
- Power (HP)
- 1
- Absorption at 230V (A)
- 4.2
- Current consumption at 400V (A)
- 2.4
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 120
- Min. head (m.)
- 19
- Max. head (m.)
- 36.5
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 230 V
400 V - Height (cm)
- 21.9
- Width (cm)
- 29.6
- Depth (cm)
- 22.1
- Weight (Kg)
- 10.8
- Warranty (years)
- 2
CP-ST4 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 150-158-ST4

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



