CP 132-ST4 - 0.75 HP three-phase stainless steel centrifugal electric pump
Made of AISI 304 stainless steel. Flow rate up to 120 l/min (7.2 m³/h). Head up to 24 m. 0.55 kW (0.75 HP) motor.
The Pedrollo CP 132-ST4 centrifugal electric pump can pump clean water and liquids that are chemically non-aggressive towards the materials from which the pump is made.
Recommended for use in the domestic, agricultural and industrial sectors.
The pump flow rate ranges from 10 to 120 litres per minute and the head from 12 to 24 metres.
The CP 132-ST4 is made entirely of stainless steel for greater robustness.
The pump body and impeller are made of AISI 304 stainless steel and the shaft is made of AISI 431 stainless steel.
For total hygiene and to ensure maximum resistance to corrosion, all components in contact with the pumped liquid are made of AISI 304 stainless steel.
- Motor connection
- THREE-PHASE
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 2.3
- Current consumption at 400V (A)
- 1.3
- Suction mouth
- 1" 1/4
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 120
- Min. head (m.)
- 12
- Max. head (m.)
- 24
- Jobs
- air conditioning systems
cooling systems
irrigation
washing systems
water supply
water treatment plants - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 6.55pm
- Width (cm)
- 26.6
- Depth (cm)
- 18.1
- Weight (Kg)
- 7.2
CP-ST4 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 100-130-132-ST4

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



