CPm 100-ST4 - Single-phase 0.33 HP stainless steel centrifugal electric pump
Made of AISI 304 stainless steel. Flow rate up to 90 l/min (5.4 m³/h). Head up to 16 m. 0.25 kW (0.33 HP) motor.
The Pedrollo CPm 100-ST4 centrifugal electric pump is made entirely of stainless steel.
The pump body and impeller are made of AISI 304 stainless steel while the shaft is made of AISI 431 stainless steel.
The CPm 100-ST4 is recommended for use in the agricultural, domestic and industrial sectors.
It can pump clean water and liquids that are not aggressive to the pump materials.
All components in contact with the pumped liquid are made of AISI 304 stainless steel to guarantee total hygiene and maximum resistance to corrosion.
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.33
- Absorption at 230V (A)
- 2
- Impeller
- AISI 316L Stainless Steel
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 90
- Min. head (m.)
- 6.5
- Max. head (m.)
- 16
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 18.5
- Width (cm)
- 26.6
- Depth (cm)
- 18.1
- Weight (Kg)
- 5.7
CPm-ST4 models and performance
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the CP 100-130-132-ST4

Bearings
| Pump side motor bearing | 6201 ZZ |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-12 |
| LP diameter | 12 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Mat
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
