-42%

CKRm 90 - 1 HP single-phase self-priming liquid ring electric pump

Flow rate up to 50 l/min (3 m³/h). Head up to 60 m. Motor 0.75 Kw (1 HP).

€263.23 Tax included

215.76 Tax excluded

€453.84-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

CKRm 90 - 1 HP single-phase self-priming liquid ring electric pump
  • Use dot instead of comma

Loading

Description

The CKRm 90 self-priming electric pump from the CKR series by Pedrollo can pump clean water and liquids that are chemically non-aggressive for the components.

Recommended for domestic, industrial and agricultural installations.

Thanks to its specific operating principle, the liquid ring impeller, the CKRm 90 is suitable when the flow is irregular or mixed with air.

It is an excellent solution thanks to its excellent suction capacity, capable of guaranteeing priming up to 9 metres deep.

Compact, it can be easily installed even in tight spaces.

Pedrollo used cast iron, aluminum, bronze, and stainless steel for its construction, which provide solidity and robustness.

Data sheet
Brand Pedrollo
Reference CKRm 90
In stock 19 Items
MPN 46CKER90A1
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
5.7
Suction mouth
1"
Delivery mouth
1"
Pump body
Cast iron
Impeller
Brass
Number of impellers
1
Pump shaft
AISI 304 stainless steel
Check valve
No
Minimum flow rate (l./min.)
5
Max. flow rate (l./min.)
50
Min. head (m.)
7
Max. head (m.)
60
Motor voltage
230 V
Height (cm)
17.9
Width (cm)
13.4
Depth (cm)
29.55
Weight (Kg)
12
Warranty (years)
2
Attachments

CKR data sheet

Construction and operating characteristics. Working curves, limits of use and dimensions of the Pedrollo CKR series pumps.

Download (333.5KB)

CKRm Models and Performance

TYPE
single phase
CKRm 80
CKRm 90
POWER
KWHP
0.550.75
0.751

Construction data of the CKR series

CKR pump cutaway
Bearings
Pump side motor bearing6203 ZZ
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealSingle Mechanical Seal
Shrinkage DN1=450 DN2=350AR-12V
LP diameter12
LP fixed ringCeramic
LP rotating ringGraphite
LP elastomerViton
Materials
1.0 - Pump bodyCast iron GJL 200 EN 1561
2.1 - Seal holder coverBrass CW617N EN 12165
3.0 - ImpellerBrass CW617N EN 12165
4.0 - Pump shaftStainless steel EN 1.4057 (AISI 431)
5.3 - Diaphragm/Diffuser CoverStainless steel EN 1.4301 (AISI 304)
6.0 - Motor holderEN-AB 46100 aluminium
6.1 - Engine coverEN-AB 46100 aluminium
7.0 - LanternEN-AB 46100 aluminium