BCm 10/50 (10m) - 1 HP single-phase DOUBLE-CHANNEL electric pump for waste water
Flow rate up to 600 l/min (36 m³/h). Head up to 12 m. 0.75 kW (1 HP) motor. 10 m cable with Schuko plug.
The BCm 10/50 submersible electric pump from Pedrollo 's BC series is recommended when working conditions are extreme and high performance is required.
Recommended for draining dirty and sewage water.
The double-channel stainless steel impeller with which it is equipped allows the pumping of liquids containing suspended solids up to 50 millimetres in diameter.
It can be installed up to 5 meters below the water level. For continuous operation, it requires a minimum immersion depth of 290 mm.
The BCm 10/50 is made with a mix of cast iron and stainless steel which gives solidity and greater resistance to corrosion.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 5
- Capacitor
- 20 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 600
- Min. head (m.)
- 2
- Max. head (m.)
- 12
- Cable length (m.)
- 10
- Jobs
- drainage
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 43.2
- Weight (Kg)
- 14.8
- Warranty (years)
- 2
BCm models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||



