BCm 15/50-ST - 1.5 HP single-phase, dual-channel electric sewage pump
Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 kW (1.5 HP) motor.
The BCm 15/50-ST submersible electric pump is built entirely of stainless steel and is characterised by particular resistance to corrosion and abrasion.
It is recommended for the drainage of dirty and sewage water in the domestic and civil sectors, for the conveyance of waste water and sewage, waste water, surface water, water mixed with mud in holiday homes, villas, single-family homes.
It is equipped with a double-channel impeller that allows the pumping of liquids containing suspended solids up to 50 millimetres in diameter with short fibres.
The hydraulic geometry of the conveying spiral and the dual-channel impeller is the result of a refined fluid dynamic calculation that has allowed us to obtain excellent performance, a high efficiency that translates into significant energy savings.
The dual-channel impeller achieves excellent performance and high energy efficiency, developing greater pressure and ensuring the pumping of solids up to 50 millimeters in diameter. It is undoubtedly the best-performing solution for wastewater drainage.
These pumps are distinguished by their reliability, particularly in fixed installations with automatic operation.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8.2
- Capacitor
- 25 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 431 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 750
- Min. head (m.)
- 2
- Max. head (m.)
- 15
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 44.7
- Weight (Kg)
- 13.3
- Warranty (years)
- 2
BCm-ST Models and Performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the BC 15/50-ST

Bearings
| Pump side motor bearing | 6203 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| Engine side model | MG1-14D SIC |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4301 (AISI 304) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |



