-42%

BCm 15/50-MF - 1.5 HP single-phase, dual-channel electric sewage pump

Flow rate up to 750 l/min (45 m³/h). Head up to 15 m. 1.1 kW (1.5 HP) motor.

€609.24 Tax included

499.38 Tax excluded

€1,050.42-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

BCm 15/50-MF - 1.5 HP single-phase, dual-channel electric sewage pump
  • Use dot instead of comma

Loading

Description

The BCm 15/50-MF submersible electric pump from the BC-MF series by Pedrollo is recommended for draining dirty and sewage water.

The dual-channel impeller allows pumping liquids containing suspended solids up to 50 mm in size. The most efficient solution for wastewater drainage.

The geometry of the volute and impeller allows for excellent performance and high efficiency which translates into significant savings.

The BCm 15/50-MF is made entirely of micro-cast stainless steel which gives it particular resistance to corrosion and abrasion.

The right choice when looking for quality that guarantees efficiency and long life.

Data sheet
Brand Pedrollo
Reference BCm 15/50-MF
In stock 9 Items
MPN 48SGM86A0A1U
Motor connection
SINGLE-PHASE
Power (Kw)
1.1
Power (HP)
1.5
Absorption at 230V (A)
8.2
Capacitor
25 µF 450 VL
Delivery mouth
2"
Pump body
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
1
Crankshaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
750
Min. head (m.)
2
Max. head (m.)
15
Cable length (m.)
10
Jobs
drainage
drying up
slightly dirty waters
Max. liquid temperature (°C)
+40°C
Height (cm)
44.7
Weight (Kg)
15.5
Warranty (years)
2
Attachments

BC-MF data sheet

Construction and operating characteristics. Working curves and limits of use of Pedrollo BC-MF series pumps.

Download (1.48MB)

BCm-MF Models and Performance

TYPE
single-phase
BCm - 10/50-MF
BCm - 15/50-MF
BCm - 20/50-MF
POWER
KWHP
0.751
1.11.5
1.52

Construction data of the BC 15/50-MF series

BC-MF pump cutaway
Bearings
Pump side motor bearing6203 2RS - C3
Opposite side engine bearing6203 ZZ
Tree holding
Type of sealDouble mechanical seal in oil chamber
LM diameter14
LM fixed ringSilicon carbide
LM rotating ringGraphite
LM elastomerNBR
Shrinkage DN1=450 DN2=350MG1-14D SIC
LP diameter14
LP fixed ringSilicon carbide
LP rotating ringSilicon carbide
LP elastomerNBR
Materials
1.0 - Pump bodyStainless steel EN 1.4404 (AISI 316L)
1.4 - BasicStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4404 (AISI 316L)
6.0 - Motor holderStainless steel EN 1.4301 (AISI 304)
6.1 - Engine coverStainless steel EN 1.4301 (AISI 304)
7.0 - LanternCast iron GJL 200 EN 1561