BCm 20/50-MF - 2 HP single-phase, dual-channel electric sewage pump
The Pedrollo BCm 20/50-MF single-phase electric pump is recommended for draining dirty and sewage water in the domestic, civil and industrial sectors.
Suitable for conveying waste water and sewage, waste water, surface water, water mixed with sludge in holiday homes, villas, single-family homes.
Pedrollo has studied various solutions to make the BCm 20/50-MF an efficient and resistant electric pump.
The hydraulic geometry of the volute and the double-channel impeller allows for excellent efficiency and energy savings at the same time.
The dual-channel impeller achieves excellent performance and high energy efficiency, developing greater pressure and ensuring the pumping of solids with a diameter of up to 50 millimetres.
The BCm 20/50-MF electric pump is built entirely of micro-cast stainless steel and is characterised by particular resistance to corrosion and abrasion.
It can be installed up to 5 meters below water level.
A 10-meter cable is also supplied.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Absorption at 230V (A)
- 8.2
- Capacitor
- 25 µF 450 VL
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 750
- Min. head (m.)
- 2
- Max. head (m.)
- 15
- Cable length (m.)
- 10
- Jobs
- drainage
drying up
slightly dirty waters - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 44.7
- Weight (Kg)
- 15.5
- Warranty (years)
- 2
BCm-MF Models and Performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the BC 15/50-MF series

Bearings
| Pump side motor bearing | 6203 2RS - C3 |
| Opposite side engine bearing | 6203 ZZ |
Tree holding
| Type of seal | Double mechanical seal in oil chamber |
| LM diameter | 14 |
| LM fixed ring | Silicon carbide |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
| Shrinkage DN1=450 DN2=350 | MG1-14D SIC |
| LP diameter | 14 |
| LP fixed ring | Silicon carbide |
| LP rotating ring | Silicon carbide |
| LP elastomer | NBR |
Materials
| 1.0 - Pump body | Stainless steel EN 1.4404 (AISI 316L) |
| 1.4 - Basic | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4404 (AISI 316L) |
| 6.0 - Motor holder | Stainless steel EN 1.4301 (AISI 304) |
| 6.1 - Engine cover | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |


