6SR36/22 - PSR - 30 HP three-phase submersible electric pump
Flow rate up to 800 l/min (60 m³/h). Head up to 274 m. 22 Kw (30 HP) motor.
The 6SR36/22 - PSR electric pump by Pedrollo is designed and built with the aim of providing good performance and at the same time a solid construction.
Equipped with impellers and diffusers made of special materials that can resist abrasion caused by sand. It supports pumping water for pumping with sand content not exceeding 100 grams per cubic meter.
The 6SR36/22 - PSR is recommended for use in the domestic, civil and agricultural sectors, in particular for the distribution of water in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The installation can be carried out up to 150 meters below the water level, thanks to the PSR engine and in wells with a diameter greater than 6 inches.
The flow rate varies from 100 to 800 litres per minute with a head from 92 to 274 metres.
It must be powered by a three-phase voltage, has a horsepower of 22 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The 6SR36/22 - PSR is made of a mix of cast iron, AISI 304 stainless steel and noryl. Pedrollo has used this mix of materials to create a robust product that resists work and wear.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 22
- Power (HP)
- 30
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 22
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 800
- Min. head (m.)
- 92
- Max. head (m.)
- 274
- Cable length (m.)
- 4
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 350.7
- External diameter (cm)
- 14.8
- Weight (Kg)
- 143.9
- Warranty (years)
- 2
