6SR36/18 - PSR - 25 HP three-phase submersible electric pump
Flow rate up to 800 l/min (60 m³/h). Head up to 224 m. 18.5 Kw (25 HP) motor.
The 6SR36/18 - PSR electric pump by Pedrollo is equipped with impellers and diffusers made of special materials capable of resisting abrasion caused by sand.
Recommended for pumping clean water with sand content not exceeding 100 grams per cubic meter.
The 6SR36/18 - PSR is recommended in the civil and agricultural sectors. In particular, its characteristics make it suitable for water distribution in combination with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
Equipped with a PD motor, this allows it to be installed up to 150 meters below the water level.
It can be installed in all wells larger than 6 inches in diameter.
The 6SR36/18 - PSR has a flow rate ranging from 200 to 1000 litres per minute with a head of 75 to 224 metres.
It must be powered by a three-phase voltage, has a horsepower of 25 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The pump construction is solid. Pedrollo has used stainless steel and cast iron to create a product that is resistant and robust.
The 6SR36/18 - PSR comes with a 4 meter long power cable.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 18.5
- Power (HP)
- 25
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 18
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 800
- Min. head (m.)
- 75
- Max. head (m.)
- 224
- Cable length (m.)
- 4
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 302.8
- External diameter (cm)
- 14.8
- Weight (Kg)
- 126.7
- Warranty (years)
- 2



