6SR44/20 - PD - 30 HP three-phase submersible electric pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 248 m. 22 Kw (30 HP) motor.
The 6SR44/20 - PD electric pump by Pedrollo is suitable for use in the civil and agricultural sectors, in particular for diversified applications such as industrial, municipal and agricultural water needs, for the distribution of water in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The special feature of this pump is the construction of the impellers and diffusers made in such a way as to resist abrasion caused by sand. The pump allows the pumping of water with sand content up to 100 grams per cubic meter.
The 6SR44/20 - PD can be housed in wells with diameters greater than 6 inches.
It is equipped with a rewindable oil-bath PD motor which allows it to be installed up to 200 metres underground.
The flow rate varies from 200 to 1000 litres per minute with a head from 39 to 248 metres.
The 6SR44/20 - PD must be powered by a three-phase voltage, has a horsepower of 10 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The pump is made of a mix of cast iron, AISI 304 stainless steel and noryl. Pedrollo has used this mix of materials to create a robust product that resists work and wear.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 22
- Power (HP)
- 30
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 22
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 39
- Max. head (m.)
- 248
- Cable length (m.)
- 4
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 328.8
- External diameter (cm)
- 14.8
- Weight (Kg)
- 119.5
- Warranty (years)
- 2
Models and performance 6SR 44
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 6SR36 series

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



