6SR44/14 - PD - 20 HP three-phase submersible electric pump
Flow rate up to 1000 l/min (60 m³/h). Head up to 174 m. 15 Kw (20 HP) motor.
The 6SR44/14 - PD electric pump by Pedrollo is suitable for use in the civil and agricultural sectors.
The special feature of this pump is the construction of the impellers and diffusers made in such a way as to resist abrasion caused by sand. The pump allows the pumping of water with sand content up to 100 grams per cubic meter.
The 6SR44/14 - PD is suitable for diversified applications such as industrial, municipal and agricultural water needs, for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
The pump can be installed in wells with diameters greater than 6 inches and up to 200 meters deep.
It is equipped with a rewindable oil-bath PD motor.
The 6SR44/14 - PD has a flow rate ranging from 200 to 1000 litres per minute with a head from 27.5 to 174 metres.
It must be powered by a three-phase voltage, has a horsepower of 7.5 HP and the temperature of the liquid to be pumped goes up to +35 degrees centigrade.
The 6SR44/14 - PD has a body made of cast iron, impellers in noryl and the pump shaft in AISI 304 stainless steel. The use of these materials makes the pump resistant, robust and allows it to last over time.
The 4-meter long power cable is supplied.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 15
- Power (HP)
- 20
- Delivery mouth
- 3"
- Pump body
- Cast iron
- Impeller
- Noryl
- Number of impellers
- 14
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 200
- Max. flow rate (l./min.)
- 1000
- Min. head (m.)
- 27.5
- Max. head (m.)
- 174
- Cable length (m.)
- 4
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 256.5
- External diameter (cm)
- 14.8
- Weight (Kg)
- 95.1
- Warranty (years)
- 2
Models and performance 6SR 44
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 6SR36 series

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4021 (AISI 420) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Cast iron GJL 200 EN 1561 |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



