6HR 34/6 - PD - 12.5 HP three-phase submersible electric pump
Flow rate up to 800 l/min (48 m³/h). Head up to 83 meters. 9.2 kW (12.5 HP) motor.
Description
The 6HR 34/6 - PD submersible electric pump from the 6HR series by Pedrollo boasts high mechanical resistance to wear and sand.
It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.
The 6HR 34/6 - PD is reliable and guarantees a long operating life.
Pedrollo has created the electric pump in micro-cast stainless steel which ensures solidity and robustness.
It can be installed both vertically and horizontally up to 200 meters below water level.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 9.2
- Power (HP)
- 12.5
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 800
- Min. head (m.)
- 38
- Max. head (m.)
- 83
- Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 158.4
- External diameter (cm)
- 15
- Weight (Kg)
- 72.9
- Warranty (years)
- 2
Models and performances 6HR 34
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 6HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |

