4SR 10/43 N-PS - 10 HP three-phase submersible electric pump
Flow rate up to 250 l/min (15 m³/h). Head up to 271 meters. 7.5 kW (10 HP) motor.
Description
The 4SR 10/43 N-PS submersible electric pump from the 4SR series by Pedrollo guarantees exceptional performance and efficiency.
The refined hydraulic design ensures exceptional performance and remarkable wear resistance.
Among the best in the 4-inch submersible category.
The 4SR 10/43 N-PS is equipped with a patented inductor which guarantees a high priming capacity.
It can be installed both horizontally and vertically up to 300 meters below water level.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 7.5
- Power (HP)
- 10
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 43
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 51
- Max. head (m.)
- 271
- Cable length (m.)
- 3.6
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 313
- External diameter (cm)
- 9.8
- Weight (Kg)
- 52.5
Models and performances 4SR 10-N
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4SR-N series

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



