4SR 10/18 N-PS - 4 HP three-phase submersible electric pump
Flow rate up to 250 l/min (15 m³/h). Head up to 113 metres. 3 kW (4 HP) motor.
The 4SR 10/18 N-PS submersible electric pump from the 4SR series by Pedrollo is among the best in the 4-inch submersible pump category.
It can be installed in domestic, civil and industrial environments, in particular for the distribution of water in combination with pressure tanks, for irrigation, for washing systems and for pressure boosting.
The hydraulic design of the 4SR 10/18 N-PS guarantees high performance and efficiency and remarkable resistance to wear from sand and corrosion.
Equipped with an innovative system that guarantees a high priming capacity for operation in wells with the presence of gas or air mixed in the water.
It can pump clean water with a maximum of 150 grams of sand per cubic meter.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Current consumption at 400V (A)
- 6.9
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 18
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 21
- Max. head (m.)
- 113
- Cable length (m.)
- 3.6
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 157.6
- External diameter (cm)
- 9.8
- Weight (Kg)
- 27
Models and performances 4SR 10-N
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4SR-N series

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



