4SR 10/9 N-PD - 2 HP three-phase submersible electric pump
Flow rate up to 250 l/min (15 m³/h). Head up to 56.5 metres. 1.5 kW (2 HP) motor.
The 4SR 10/9 N-PD submersible electric pump from the 4SR series by Pedrollo allows for considerable energy savings.
The stainless steel used by Pedrollo gives it solidity, robustness and allows it to last over time.
Considered among the best in the inch submersible category.
The 4SR 10/9 N-PD is recommended for installations in the agricultural, civil and domestic sectors, in particular for the distribution of water in conjunction with pressure tanks, for irrigation, for washing systems and for pressure boosting.
It can be installed both horizontally and vertically up to 200 meters below water level.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Current consumption at 400V (A)
- 4.3
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 9
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 10.5
- Max. head (m.)
- 56.5
- Cable length (m.)
- 2
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 103
- External diameter (cm)
- 9.8
- Weight (Kg)
- 16
- Warranty (years)
- 2
Models and performances 4SR 10-N
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4SR-N series

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Reinforced technopolymer |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



