-45%

4HR 18/16 - PS - 5.5 HP three-phase submersible electric pump

Flow rate up to 420 l/min (25.2 m³/h). Head up to 94 meters. 4 kW (5.5 HP) motor.

€2,026.42 Tax included

1661 Tax excluded

€3,684.40-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

4HR 18/16 - PS - 5.5 HP three-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The 4HR 18/16 - PS submersible electric pump from the 4SR series by Pedrollo can be used for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.

It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.

Made entirely of stainless steel of considerable thickness, it guarantees a long operating life.

The 4HR 18/16 - PS is among the best in the 4-inch submersible category and is recommended for those looking for a quality product.

The installation can be carried out both horizontally and vertically up to 100 meters below water level.

Data sheet
Brand Pedrollo
Reference 4HR 18/16 - PS
In stock 10 Items
MPN 494H1816WNA
Motor connection
THREE-PHASE
Power (Kw)
4
Power (HP)
5.5
Delivery mouth
2"
Pump body
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
30
Pump shaft
AISI 304 stainless steel
Degree of protection
IP 68
Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
420
Min. head (m.)
19
Max. head (m.)
94
Cable length (m.)
3.6
Jobs
fire prevention systems
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+35°C
Height (cm)
188.8
External diameter (cm)
10
Weight (Kg)
47.5
Warranty (years)
2
Attachments

4HR Technical Data Sheet

Performance, construction features and operating curves of Pedrollo 4HR series pumps with PD rewindable and PS encapsulated motors.

Download (1.34MB)

4HR 18 models and performance

TYPE
Three-phase
4HR 18/4
4HR 18/6
4HR 18/9
4HR 18/12
4HR 18/16
4HR 18/22
4HR 18/30
POWER
KWHP
1.11.5
1.52
2.23
34
45.5
5.57.5
7.510

Construction data of the 4HR series

4HR pump cutaway
Bearings
Pump bearing - fixed partSpecial elastomer
Pump bearing - rotating partStainless steel EN 1.4301 (AISI 304)
Tree holding
Materials
1.3 - Delivery bodyStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4301 (AISI 304)
4.2 - Towing jointStainless steel EN 1.4301 (AISI 304)
5.1 - DiffuserStainless steel EN 1.4301 (AISI 304)
5.2 - Wear ringSpecial elastomer
7.0 - LanternStainless steel EN 1.4301 (AISI 304)
7.1 - Check ValveStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)