4HRm 14/12 - PS - 3 HP single-phase submersible electric pump
Flow rate up to 340 l/min (20.4 m³/h). Head up to 62 meters. 2.2 Kw (3 HP) motor.
Submersible electric pump with pump body in micro-cast AISI 304 stainless steel and PEDROLLO motor encapsulated in a water bath.
The PEDROLLO 4HRm 14/12 - PS is recommended for pumping clean water with a sand content not exceeding 100 grams per cubic metre.
It has a flow rate that varies from 50 to 340 litres per minute with a head of 15 to 62 metres.
Due to its high performance and reliability, it is suitable for domestic, civil and industrial use, for the distribution of water in combination with pressure tanks, for irrigation of vegetable gardens and gardens, for washing systems, for pressure raising or for fire-fighting systems.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 2.2
- Power (HP)
- 3
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 12
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 340
- Min. head (m.)
- 15
- Max. head (m.)
- 62
- Cable length (m.)
- 2
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 142.4
- External diameter (cm)
- 10
- Weight (Kg)
- 33
- Warranty (years)
- 2
Models and performances 4HRm 14
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



