4HR 18/22 - PD - 7.5 HP three-phase submersible electric pump
Flow rate up to 420 l/min (25.2 m³/h). Head up to 129 meters. 5.5 kW (7.5 HP) motor.
The 4HR 18/22 - PD submersible electric pump from the 4SR series by Pedrollo can be used for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.
Made entirely of stainless steel of considerable thickness, it guarantees a long operating life.
The 4HR 18/22 - PD is among the best in the 4-inch submersible category and is recommended for those looking for a quality product.
The installation can be carried out both horizontally and vertically up to 100 meters below water level.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 22
- Pump shaft
- AISI 304 stainless steel
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 420
- Min. head (m.)
- 26.5
- Max. head (m.)
- 129
- Cable length (m.)
- 3.6
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 23.42
- External diameter (cm)
- 10
- Weight (Kg)
- 51.9
- Warranty (years)
- 2
4HR 18 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



