4HRm 14/8 - PD - 2 HP single-phase submersible electric pump
Flow rate up to 340 l/min (20.4 m³/h). Head up to 41 metres. 1.5 kW (2 HP) motor.
The 4HRm 14/8 - PD submersible electric pump from the 4SR series by Pedrollo can be used for water distribution in conjunction with pressure tanks, for irrigation, for pressure boosting and for fire-fighting systems.
It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.
Made entirely of stainless steel of considerable thickness, it guarantees a long operating life.
The 4HRm 14/8 - PD is among the best in the 4-inch submersible pump category and is recommended for those looking for a quality product.
The installation can be carried out both horizontally and vertically up to 100 meters below water level.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.5
- Power (HP)
- 2
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 8
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 340
- Min. head (m.)
- 10
- Max. head (m.)
- 41
- Cable length (m.)
- 2
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 11.67
- External diameter (cm)
- 10
- Weight (Kg)
- 25.2
- Warranty (years)
- 2
Models and performances 4HRm 14
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



