4HRm 14/6 - PD - 1.5 HP single-phase submersible electric pump
Flow rate up to 340 l/min (20.4 m³/h). Head up to 31 meters. 1.1 kW (1.5 HP) motor.
The 4HRm 14/6 - PD submersible electric pump from the 4HR series by Pedrollo can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.
It stands out for its high resistance and premium build quality.
Recommended for agricultural, civil and industrial installations.
Resistant to sand and corrosion, as in the case of installations in seaside areas, it is recommended when a product that lasts over time is required.
The 4HR 14/6m - PD can be installed up to 100 metres below water level both horizontally and vertically.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 6
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 340
- Min. head (m.)
- 7.5
- Max. head (m.)
- 31
- Cable length (m.)
- 2
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 98
- External diameter (cm)
- 10
- Weight (Kg)
- 21
- Warranty (years)
- 2
Models and performances 4HRm 14
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



