4HR 10/7 - PD - 1.5 HP three-phase submersible electric pump
Flow rate up to 250 l/min (15 m³/h). Head up to 40 meters. 1.1 kW (1.5 HP) motor.
Description
The 4HR 10/7 - PD submersible electric pump from the 4HR series by Pedrollo is among the best in the 4-inch category.
It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.
It allows installation in coastal areas thanks to its high mechanical resistance.
It can be installed up to 200 meters below water level both horizontally and vertically.
The 4HR 10/7 - PD engine is a rewindable oil bath engine.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Delivery mouth
- 2"
- Pump body
- AISI 304 stainless steel
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 7
- Crankshaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 50
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 10
- Max. head (m.)
- 40
- Cable length (m.)
- 2
- Jobs
- fire prevention systems
irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 102.8
- External diameter (cm)
- 10
- Weight (Kg)
- 23.8
- Warranty (years)
- 2
4HR 10 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4HR series

Bearings
| Pump bearing - fixed part | Special elastomer |
| Pump bearing - rotating part | Stainless steel EN 1.4301 (AISI 304) |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | Stainless steel EN 1.4301 (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Stainless steel EN 1.4301 (AISI 304) |
| 5.2 - Wear ring | Special elastomer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



