-45%

4HRm 10/7 - PD - 1.5 HP single-phase submersible electric pump

Flow rate up to 250 l/min (15 m³/h). Head up to 40 meters. 1.1 kW (1.5 HP) motor.

€854.18 Tax included

700.15 Tax excluded

€1,553.06-45%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

4HRm 10/7 - PD - 1.5 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The 4HRm 10/7 - PD submersible electric pump from the 4HR series by Pedrollo is among the best in the 4-inch category.

It can pump clean or brackish water with a sand content not exceeding 100 grams per cubic meter.

It allows installation in coastal areas thanks to its high mechanical resistance.

It can be installed up to 200 meters below water level both horizontally and vertically.

The 4HRm 10/7 - PD engine is a rewindable oil bath engine.

Data sheet
Brand Pedrollo
Reference 4HRm 10/7 - PD
In stock 10 Items
MPN 494H1007WLA1
Motor connection
SINGLE-PHASE
Power (Kw)
1.1
Power (HP)
1.5
Delivery mouth
2"
Pump body
AISI 304 stainless steel
Impeller
AISI 304 stainless steel
Number of impellers
7
Crankshaft
AISI 304 stainless steel
Check valve
Yes
Degree of protection
IP 68
Minimum flow rate (l./min.)
50
Max. flow rate (l./min.)
250
Min. head (m.)
10
Max. head (m.)
40
Cable length (m.)
2
Jobs
fire prevention systems
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+35°C
Height (cm)
105.3
External diameter (cm)
10
Weight (Kg)
23.8
Warranty (years)
2
Attachments

4HR Technical Data Sheet

Performance, construction features and operating curves of Pedrollo 4HR series pumps with PD rewindable and PS encapsulated motors.

Download (1.34MB)

Models and performance 4HRm 10

TYPE
Single phase
4HRm 10/5
4HRm 10/7
4HRm 10/10
4HRm 10/15
POWER
KWHP
0.751
1.11.5
1.52.2
2.23

Construction data of the 4HR series

4HR pump cutaway
Bearings
Pump bearing - fixed partSpecial elastomer
Pump bearing - rotating partStainless steel EN 1.4301 (AISI 304)
Tree holding
Materials
1.3 - Delivery bodyStainless steel EN 1.4301 (AISI 304)
3.0 - ImpellerStainless steel EN 1.4301 (AISI 304)
4.0 - Pump shaftStainless steel EN 1.4301 (AISI 304)
4.2 - Towing jointStainless steel EN 1.4301 (AISI 304)
5.1 - DiffuserStainless steel EN 1.4301 (AISI 304)
5.2 - Wear ringSpecial elastomer
7.0 - LanternStainless steel EN 1.4301 (AISI 304)
7.1 - Check ValveStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)