4BLOCKm 8/8 (30m) - Single-phase submersible electric pump 1.5 HP
Flow rate up to 200 l/min (12 m³/h). Head up to 53.5 m. 1.1 kW (1.5 HP) motor. 30 meters of cable.
The 4-BLOCKm 8/8 submersible electric pump from Pedrollo 's 4-BLOCK series is at the top of the range in terms of performance in the 4-inch monobloc category.
Recommended for installations in the domestic, civil and agricultural sectors.
Suitable for automatic water distribution in conjunction with pressure tanks and for irrigation.
It can pump clean water with a maximum sand content of up to 200 grams per cubic meter.
The 4-BLOCKm 8/8 can be installed up to 100 metres below water level both vertically and horizontally.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8
- Capacitor
- 35 µF 450 VL
- Delivery mouth
- 1" 1/4
- Pump body
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 8
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 200
- Min. head (m.)
- 11.5
- Max. head (m.)
- 56
- Cable length (m.)
- 20
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 79.9
- External diameter (cm)
- 10
- Weight (Kg)
- 15.4
- Warranty (years)
- 2
4BLOCKm 8 models and performances
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4BLOCK series

Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
