-42%

4BLOCKm 8/5 (30m) - 1 HP single-phase submersible electric pump

Flow rate up to 200 l/min (12 m³/h). Head up to 35 m. 0.75 kW (1 HP) motor. 30 m cable.

€407.58 Tax included

334.08 Tax excluded

€702.72-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

4BLOCKm 8/5 (30m) - 1 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The 4-BLOCKm 8/5 submersible electric pump from the 4-BLOCK series by Pedrollo has a minimum efficiency index that far exceeds ERP requirements.

4-inch monoblock at the top of its category for performance.

With completely independent and floating impellers that make the possible presence of sand irrelevant.

The 4-BLOCKm 8/5 is easy to install as it is already complete with capacitor and thermal overload cutout.

The supplied power cable is 30 meters long.

Data sheet
Brand Pedrollo
Reference 4BLOCKm 8/5 30m
In stock 10 Items
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
6
Capacitor
35 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Delrin
Number of impellers
5
Pump shaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
40
Max. flow rate (l./min.)
200
Min. head (m.)
7
Max. head (m.)
35
Cable length (m.)
20
Jobs
irrigation
Max. liquid temperature (°C)
+35°C
Height (cm)
65.5
External diameter (cm)
10
Weight (Kg)
12.5
Warranty (years)
2
Attachments

4BLOCK technical sheet

Construction and operating characteristics. Operating curves, operating limits, and dimensions of Pedrollo 4BLOCK series pumps.

Download (1.55MB)

4BLOCKm 8 models and performances

TYPE
single phase
4BLOCKm 8/3
4BLOCKm 8/5
4BLOCKm 8/7
POWER
KWHP
0.550.75
0.751
1.11.5

Construction data of the 4BLOCK series

4BLOCK pump cutaway
Bearings
Pump side motor bearing6203
Opposite side engine bearing6203
Tree holding
Type of sealSingle Mechanical Seal in oil chamber
Engine side modelST1-16
LM diameter16
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Materials
1.3 - Delivery bodyStainless steel EN 1.4301 (AISI 304)
2.1 - Seal holder coverBrass CW617N EN 12165
3.0 - ImpellerPOM acetal resin
4.0 - Pump shaftStainless steel EN 1.4301 (AISI 304)
4.1 - CrankshaftStainless steel EN 1.4057 (AISI 431)
5.0 - Stadium boxStainless steel EN 1.4301 (AISI 304)
5.1 - DiffuserReinforced technopolymer
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.0 - LanternReinforced technopolymer
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)