-42%

4BLOCKm 6/7 (30m) - 1 HP single-phase submersible electric pump

Flow rate up to 150 l/min (9 m³/h). Head up to 45.5 m. 0.75 kW (1 HP) motor. 30 m cable.

€416.78 Tax included

341.62 Tax excluded

€718.58-42%

Make a purchase proposal

Your Offer is sent.

Your Offer is accepted, please check your inbox.

4BLOCKm 6/7 (30m) - 1 HP single-phase submersible electric pump
  • Use dot instead of comma

Loading

Description

The 4-BLOCKm 6/7 submersible electric pump from the 4-BLOCK series by Pedrollo is recommended for use in the domestic, civil and agricultural sectors.

At the top of the 4-inch monoblock category for performance.

The 4-BLOCKm 6/7 has completely independent and floating impellers which make the possible presence of sand irrelevant.

It can pump clean water with a maximum content of 200 grams per cubic meter of sand.

The installation can be carried out both horizontally and vertically up to 200 metres below water level.

The supplied power cable is 30 meters long.

Data sheet
Brand Pedrollo
Reference 4BLOCKm 6/7 30m
In stock 9 Items
Motor connection
SINGLE-PHASE
Power (Kw)
0.75
Power (HP)
1
Absorption at 230V (A)
6
Capacitor
35 µF 450 VL
Delivery mouth
1" 1/4
Pump body
AISI 304 stainless steel
Impeller
Delrin
Number of impellers
7
Pump shaft
AISI 304 stainless steel
Check valve
No
Degree of protection
IP 68
Minimum flow rate (l./min.)
25
Max. flow rate (l./min.)
150
Min. head (m.)
14.5
Max. head (m.)
45.5
Cable length (m.)
20
Jobs
irrigation
pressurization systems
water supply
Max. liquid temperature (°C)
+35°C
Height (cm)
71.8
External diameter (cm)
10
Weight (Kg)
13.1
Warranty (years)
2
Attachments

4BLOCK technical sheet

Construction and operating characteristics. Operating curves, operating limits, and dimensions of Pedrollo 4BLOCK series pumps.

Download (1.55MB)

4BLOCKm models and performances 6

TYPE
three phase
4BLOCKm 6/3
4BLOCKm 6/5
4BLOCKm 6/7
4BLOCKm 6/10
POWER
KWHP
0.370.50
0.550.75
0.751
1.11.5

Construction data of the 4BLOCK series

4BLOCK pump cutaway
Bearings
Pump side motor bearing6203
Opposite side engine bearing6203
Tree holding
Type of sealSingle Mechanical Seal in oil chamber
Engine side modelST1-16
LM diameter16
LM fixed ringCeramic
LM rotating ringGraphite
LM elastomerNBR
Materials
1.3 - Delivery bodyStainless steel EN 1.4301 (AISI 304)
2.1 - Seal holder coverBrass CW617N EN 12165
3.0 - ImpellerPOM acetal resin
4.0 - Pump shaftStainless steel EN 1.4301 (AISI 304)
4.1 - CrankshaftStainless steel EN 1.4057 (AISI 431)
5.0 - Stadium boxStainless steel EN 1.4301 (AISI 304)
5.1 - DiffuserReinforced technopolymer
6.2 - Engine sleeveStainless steel EN 1.4301 (AISI 304)
7.0 - LanternReinforced technopolymer
7.2 - Pump shirtStainless steel EN 1.4301 (AISI 304)
7.3 - Cable coverStainless steel EN 1.4301 (AISI 304)
8.0 - Suction Grid/FilterStainless steel EN 1.4301 (AISI 304)