4BLOCKm 2/18 (20m) - 1.5 HP single-phase submersible electric pump
Flow rate up to 60 l/min (3.6 m³/h). Head up to 140 m. 1.1 kW (1.5 HP) motor. 20 m cable.
The 4-BLOCKm 2/18 submersible electric pump from the 4-BLOCK series by Pedrollo is recommended for use in the domestic, civil and agricultural sectors.
At the top of the 4-inch monoblock category for performance.
The 4-BLOCKm 2/18 has completely independent and floating impellers which make the possible presence of sand irrelevant.
It can pump clean water with a maximum content of 200 grams per cubic meter of sand.
The installation can be carried out both horizontally and vertically up to 200 metres below water level.
The supplied power cable is 20 meters long.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 8
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 60
- Min. head (m.)
- 53.5
- Max. head (m.)
- 140
- Cable length (m.)
- 20
- Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 90.7
- External diameter (cm)
- 10
- Weight (Kg)
- 17.2
4BLOCKm 2 models and performances
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4BLOCK series

Bearings
| Pump side motor bearing | 6203 |
| Opposite side engine bearing | 6203 |
Tree holding
| Type of seal | Single Mechanical Seal in oil chamber |
| Engine side model | ST1-16 |
| LM diameter | 16 |
| LM fixed ring | Ceramic |
| LM rotating ring | Graphite |
| LM elastomer | NBR |
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 2.1 - Seal holder cover | Brass CW617N EN 12165 |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.1 - Crankshaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.0 - Stadium box | Stainless steel EN 1.4301 (AISI 304) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 6.2 - Engine sleeve | Stainless steel EN 1.4301 (AISI 304) |
| 7.0 - Lantern | Reinforced technopolymer |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



