3SR 5/24 - 1.5 HP three-phase submersible electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 69 m. 1.1 Kw (1.5 HP) motor.
The Pedrollo 3SR 5/24 submersible electric pump is recommended for domestic and civil applications. It is primarily used for domestic water supply, irrigation, and water systems for small communities.
The hydraulic components, coupled with a high-efficiency electric motor, make this 3SR electric pump extremely efficient in the 3” category.
The 3SR 5/24 allows you to save water thanks to its efficient performance and reduced electricity consumption.
Its construction allows the pumping of water with a sand content of up to 150 grams per cubic meter.
Thanks to their compactness and lightness, this electric pump can be easily installed in wells of 3” or more.
The submersible motor is designed with a rewindable oil bath technique.
The 3SR 5/24 can be installed up to 100 metres below water level, with an appropriately long power cable.
It has a flow rate that varies from 15 to 120 litres per minute with a head from 23 to 69 metres.
It must be powered by a three-phase voltage, has a horsepower of 1.5 HP and the temperature of the liquid to be pumped reaches up to +35 degrees centigrade.
The pump has an IP68 protection rating.
The 3SR 5/24 has a pump body and shaft made of AISI 304 stainless steel and the impeller is made of noryl which gives the product good resistance and robustness.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 1.1
- Power (HP)
- 1.5
- Absorption at 230V (A)
- 3.5
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 24
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 15
- Max. flow rate (l./min.)
- 120
- Min. head (m.)
- 23
- Max. head (m.)
- 69
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Motor voltage
- 400 V
- Height (cm)
- 175.1
- Weight (Kg)
- 16.2
- Diameter (cm)
- 7.6
- Warranty (years)
- 2
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



