3SRm 5/12 - 0.75 HP single-phase submersible electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 36 m. 0.55 Kw (0.75 HP) motor.
The Pedrollo 3SRm 5/12 submersible electric pump is designed to achieve maximum efficiency with the greatest water savings.
The components and operation ensure that using this pump allows you to save water with consequent reduced electricity consumption.
Its construction allows the pumping of water with a sand content of up to 150 grams per cubic meter.
The 3SRm 5/12 is recommended for use in the domestic and civil sector, particularly for domestic supply, irrigation and small water systems.
The pump motor is made with rewindable oil bath technique.
The 3SRm 5/12 is easy to install. Its low weight makes it easy to install in wells up to 100 meters deep with a suitable power cable.
The degree of protection against water and dust is IP68.
It has a flow rate that varies from 15 to 120 litres per minute with a head from 12 to 36 metres.
It must be powered by a single-phase voltage, has a horsepower of 0.75 HP and the temperature of the liquid to be pumped reaches up to +35 degrees centigrade.
The 3SRm 5/12 construction is solid thanks to Pedrollo 's use of premium materials such as stainless steel which ensure that the final product is solid and resistant.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 4.5
4.5 - Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 12
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 15
15 - Max. flow rate (l./min.)
- 120
120 - Min. head (m.)
- 11
11 - Max. head (m.)
- 33
33 - Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
+35°C - Motor voltage
- 230 V
- Height (cm)
- 108.8
108.8 - Weight (Kg)
- 11.4
11.4 - Diameter (cm)
- 7.6
7.6 - Warranty (years)
- 2
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



