3SR 5/9 - 0.50 HP three-phase submersible electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 27 m. 0.33 Kw (0.5 HP) motor.
The Pedrollo 3SR 5/9 submersible electric pump is extremely efficient in the 3-inch pump category.
Pedrollo created this pump with the aim of creating an efficient, low-consumption, and durable product.
The 3SR 5/9 is recommended for domestic and civil use, in particular it can be used for domestic supply, irrigation and small water systems.
The pump can handle clean water with sand content up to 150 grams per cubic meter. This pump's motor features a rewindable oil-filled motor.
It has a flow rate that varies from 15 to 120 litres per minute with a head from 9 to 27 metres.
The 3SR 5/9 is a compact pump, making it easy to install in wells. It can be mounted up to 100 meters deep with a suitable power cable. The pump is IP68 rated for water and dust protection.
It must be powered by a three-phase voltage, has a horsepower of 0.5 HP and the temperature of the liquid to be pumped reaches up to +35 degrees centigrade.
The 3SR 5/9 benefits from a solid construction, it is made of AISI 304 stainless steel which makes it robust and resistant.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Current consumption at 400V (A)
- 1.5
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 1
- Crankshaft
- AISI 304 stainless steel
- Check valve
- No
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 15
15 - Max. flow rate (l./min.)
120- Min. head (m.)
- 8
- Max. head (m.)
- 24
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Motor voltage
- 400 V
- Height (cm)
- 91.8
- Weight (Kg)
- 10
- Diameter (cm)
- 7.6
- Warranty (years)
- 2
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



