3SR 4/8 - 0.50 HP three-phase submersible electric pump
Flow rate up to 90 l/min (5.4 m³/h). Head up to 29 meters. 0.37 kW (0.50 HP) motor.
Description
The 3SR 4/8 submersible electric pump from the 3SR series by Pedrollo can be used for domestic supply, irrigation and water systems for small communities.
Recommended for domestic installations and civil use.
It can pump clean water with sand content up to 150 grams of sand per cubic meter.
Thanks to its high efficiency and consequent low electricity consumption, the 3SR 4/8 allows for considerable economic savings.
It can be installed vertically up to 100 metres below water level.
Data sheet
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.37
- Power (HP)
- 0.50
- Current consumption at 400V (A)
- 1.5
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 8
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 15
- Max. flow rate (l./min.)
- 90
- Min. head (m.)
- 7
- Max. head (m.)
- 29
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 76.5
- External diameter (cm)
- 7.6
- Weight (Kg)
- 8.5
- Warranty (years)
- 2
3SR 4 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |
