3SRm 4/6 - 0.33 HP single-phase submersible electric pump
Flow rate up to 90 l/min (5.4 m³/h). Head up to 22 meters. 0.25 kW (0.33 HP) motor.
The 3SRm 4/6 submersible electric pump from the 3SR series by Pedrollo is compact and lightweight.
Easy to install in wells 3 inches or larger. For vertical installation only, up to 100 meters below the water level.
The hydraulic components, coupled with a high-performance electric motor, make it extremely efficient in the 3-inch category.
The 3SRm 4/6 can be used for domestic supply, irrigation and water systems for small communities.
The electric pump is made of stainless steel which makes it extremely solid and resistant even to the most extreme conditions.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.25
- Power (HP)
- 0.33
- Absorption at 230V (A)
- 3.2
- Capacitor
- 14 µF 450 VL
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 6
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 15
- Max. flow rate (l./min.)
- 90
- Min. head (m.)
- 4.5
- Max. head (m.)
- 18
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 68.9
- External diameter (cm)
- 7.6
- Weight (Kg)
- 8.6
- Warranty (years)
- 2
3SRm 4 models and performance
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



