3SR 2/21 - 0.75 HP three-phase submersible electric pump
Flow rate up to 50 l/min (2.7 m³/h). Head up to 84 meters. 0.55 kW (0.75 HP) motor.
The Pedrollo 3SR 2/21 submersible electric pump has a flow rate ranging from 10 to 50 litres per minute with a head of 23 to 84 metres.
Due to its high efficiency and reliability, it is suitable for domestic, civil and industrial use, for water distribution in conjunction with pressure tanks, for irrigation of vegetable gardens and gardens, for washing systems, for pressure raising or for fire-fighting systems.
The 3SR 2/21 is a 3-inch electric pump with a rewindable water-filled motor.
It allows for economic savings thanks to its high efficiency and consequent reduced electricity consumption.
Thanks to its compactness and lightness, the 3SR 2/21 electric pump can be easily installed in wells of 3 inches or more.
The hydraulic components, coupled with a high-efficiency electric motor, make the 3SR 2/21 electric pump extremely efficient in the 3-inch category.
The pump's construction allows for the pumping of water with a sand content of up to 150 grams per cubic meter.
The product comes with a special power cable 1.5 metres long.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Current consumption at 400V (A)
- 1.9
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Delrin
- Number of impellers
- 21
- Pump shaft
- AISI 304 stainless steel
- Check valve
- Yes
- Degree of protection
- IP 68
- Minimum flow rate (l./min.)
- 10
- Max. flow rate (l./min.)
- 50
- Min. head (m.)
- 23
- Max. head (m.)
- 84
- Cable length (m.)
- 1.5
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +35°C
- Height (cm)
- 10.02
- External diameter (cm)
- 7.6
- Weight (Kg)
- 10
- Warranty (years)
- 2
3SR 2 models and performance
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
3SR construction data

Bearings
| Pump bearing - fixed part | Anti-friction polymer |
| Pump bearing - rotating part | Sintered AISI 316 steel with ceramic coating |
Tree holding
Materials
| 1.3 - Delivery body | Stainless steel EN 1.4301 (AISI 304) |
| 3.0 - Impeller | POM acetal resin |
| 4.0 - Pump shaft | Stainless steel EN 1.4301 (AISI 304) |
| 4.2 - Towing joint | Stainless steel EN 1.4404 (AISI 316L) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.3 - Diaphragm/Diffuser Cover | Reinforced technopolymer |
| 7.0 - Lantern | Stainless steel EN 1.4301 (AISI 304) |
| 7.1 - Check Valve | Stainless steel EN 1.4301 (AISI 304) |
| 7.2 - Pump shirt | Stainless steel EN 1.4301 (AISI 304) |
| 7.3 - Cable cover | Stainless steel EN 1.4301 (AISI 304) |
| 8.0 - Suction Grid/Filter | Stainless steel EN 1.4301 (AISI 304) |



