2CP 40/180A - 10 HP three-phase twin-impeller centrifugal pump
Flow rate up to 450 l/min (27 m³/h). Head up to 92 m. 7.5 kW (10 HP) motor.
The 2CP 40/180A of the Pedrollo CP series is a twin-impeller centrifugal electric pump.
Pedrollo has crafted the pump from materials such as cast iron, brass, and stainless steel for a robust, long-lasting result.
It can pump clean water and liquids that are chemically non-aggressive for the components.
The 2CP 40/180A guarantees high efficiency and its adaptability makes it suitable for the domestic, civil and industrial sectors.
Suitable for water distribution in conjunction with pressure tanks, for increasing network pressure and for fire-fighting groups.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 7.5
- Power (HP)
- 10
- Absorption at 230V (A)
- 26.7
- Current consumption at 400V (A)
- 15.4
- Suction mouth
- 2"
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 450
- Min. head (m.)
- 48
- Max. head (m.)
- 92
- Jobs
- fire prevention systems
pressurization systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 33.4
- Width (cm)
- 29.2
- Depth (cm)
- 54.2
- Weight (Kg)
- 60
- Warranty (years)
- 2
Models and performances 2CP 40/180
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 40 / 180A

Bearings
| Pump side motor bearing | 6306 ZZ- C3 |
| Opposite side motor bearing | 6206 ZZ- C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46134 |



