2CP 40/180B - 7.5 HP three-phase twin-impeller centrifugal pump
Flow rate up to 400 l/min (24 m³/h). Head up to 80 m. 5.5 kW (7.5 HP) motor.
The 2CP 40/180B twin-impeller centrifugal electric pump from Pedrollo 's CP series stands out for its performance and reliability.
Ideal for domestic, civil, and industrial installations. It is particularly suitable for water distribution in conjunction with pressure tanks, for increasing mains pressure, and for fire-fighting units.
It can pump clean water and liquids that are chemically non-aggressive for the components.
Pedrollo used cast iron, brass, and stainless steel to create the 2CP 40/180B. This combination of materials creates a robust and long-lasting product.
The flow rate ranges from 100 to 400 litres and the head from 42 to 80 metres.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 5.5
- Power (HP)
- 7.5
- Absorption at 230V (A)
- 21.3
- Current consumption at 400V (A)
- 12.3
- Suction mouth
- 2"
- Delivery mouth
- 1" 1/2
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 100
- Max. flow rate (l./min.)
- 400
- Min. head (m.)
- 42
- Max. head (m.)
- 80
- Jobs
- fire prevention systems
pressurization systems
water supply - Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 33.4
- Width (cm)
- 29.2
- Depth (cm)
- 54.2
- Weight (Kg)
- 54
- Warranty (years)
- 2
Models and performances 2CP 40/180
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 40 / 180B

Bearings
| Pump side motor bearing | 6306 ZZ- C3 |
| Opposite side motor bearing | 6206 ZZ- C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-24 |
| LP diameter | 24 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46132 |
