2CP 32/200C - 4 HP three-phase twin-impeller centrifugal pump
Description
The 2CP 32/200C twin-impeller centrifugal electric pump from the CP series by Pedrollo is recommended for use in the domestic, civil and industrial sectors.
It can pump clean water and liquids that are chemically non-aggressive for the components.
The CP 32/200C guarantees high performance and adaptability to the most varied uses.
Suitable for various fields and is particularly useful for water distribution in conjunction with pressure tanks, for increasing network pressure and for fire-fighting units.
The flow rate ranges from 40 to 250 litres and the head from 36 to 70 metres.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 3
- Power (HP)
- 4
- Absorption at 230V (A)
- 12.8
- Current consumption at 400V (A)
- 4.0
- Suction mouth
- 1" 1/2
- Delivery mouth
- 1" 1/4
- Pump body
- Cast iron
- Impeller
- Brass
- Number of impellers
- 2
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 40
- Max. flow rate (l./min.)
- 250
- Min. head (m.)
- 36
- Max. head (m.)
- 70
- Jobs
- fire prevention systems
pressurization systems
water supply - Max. liquid temperature (°C)
- +90°C
- Motor voltage
- 400 V
- Height (cm)
- 30.4
- Width (cm)
- 26.6
- Depth (cm)
- 46.4
- Weight (Kg)
- 38
- Warranty (years)
- 2
Models and performances 2CP 32/200
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 32/200

Bearings
| Pump side motor bearing | 6206 ZZ- C3 |
| Opposite side motor bearing | 6206 ZZ- C3 |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | FN-20 |
| LP diameter | 20 |
| Fixed ring LP | Graphite |
| Rotating ring LP | Ceramic |
| LP elastomer | NBR |
Materials
| 1.1 - Aspiring Body | Cast iron GJL 200 EN 1561 |
| 1.2 - Pressing Body | Cast iron GJL 200 EN 1561 |
| 3.0 - Impeller | Brass CW617N EN 12165 |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 6.0 - Motor holder | Aluminum EN-AB 46122 |



