2CPm 25/130 - 1 HP single-phase twin-impeller centrifugal electric pump
The PEDROLLO pumps of the 2CP line are recommended for pumping clean water and liquids that are chemically non-aggressive for the materials from which the pump is made.
The PEDROLLO 2CPm 25/130 has a flow rate that varies from 20 to 100 litres per minute with a head from 42 to 15 metres.
Their high efficiency and adaptability to a wide variety of applications, even non-standard ones, make them ideal for domestic, civil, and industrial applications; particularly for water distribution in conjunction with pressure tanks, for increasing network pressure, and for fire-fighting systems.
Installation must be carried out indoors or in any case protected from the elements.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.75
- Power (HP)
- 1
- Absorption at 230V (A)
- 6.3
- Minimum flow rate (l./min.)
- 20
- Max. flow rate (l./min.)
- 100
- Min. head (m.)
- 15
- Max. head (m.)
- 42
- Max. liquid temperature (°C)
- +90°C
- Height (cm)
- 20.1
- Width (cm)
- 18
- Depth (cm)
- 33
- Weight (Kg)
- 14.5
Models and performances 2CPm 25/130-25/14
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CP 25 / 130N

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-14 |
| LP diameter | 14 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | EN 1.4301 stainless steel (AISI 304) |
| 5.2 - Shim Ring | PTFE |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



