3CRm 100 - 0.75 HP single-phase multi-impeller centrifugal electric pump
Flow rate up to 120 l/min (7.2 m³/h). Head up to 38 m. Motor 0.55 Kw (0.75 HP).
The 3CRm 100 centrifugal electric pump from the 2-5CR series by Pedrollo is made entirely of stainless steel.
Pedrollo 's use of stainless steel gives the pump strength and resistance and also guarantees greater hygiene.
The 3CRm 100 also guarantees greater silence, making it the right choice in the domestic sector.
Particularly suitable for water distribution in conjunction with small or medium pressure tanks and for the irrigation of vegetable gardens and gardens.
It can pump clean water and liquids that are not chemically aggressive towards the materials from which the pump is made.
- Motor connection
- SINGLE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.9
- Capacitor
- 14 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 120
- Min. head (m.)
- 5
- Max. head (m.)
- 38
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 36.1
- Weight (Kg)
- 7.9
- Warranty (years)
- 2
Models and performances 2-5 CRm
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CR 3CR

Bearings
| Pump side motor bearing | 6202 ZZ-C3 |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



