4CR 80 - 0.75 HP three-phase multi-impeller centrifugal electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 52 m. Motor 0.55 Kw (0.75 HP).
Description
The 4CR 80 centrifugal electric pump from the 2-5CR series by Pedrollo stands out for its low energy consumption.
Made entirely of AISI 304 and 431 stainless steel for greater robustness and to ensure maximum hygiene.
The 4CR 80 also stands out for its reliability and silence which makes it suitable for the domestic and civil sector.
Recommended for activities such as water distribution in conjunction with small or medium pressure tanks and for irrigation of vegetable gardens or gardens.
Data sheet
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.55
- Power (HP)
- 0.75
- Absorption at 230V (A)
- 3.4
- Current consumption at 400V (A)
- 2
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 52
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 38.6
- Weight (Kg)
- 7.7
- Warranty (years)
- 2
Models and performances 2-5 CR
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 4CR 5CR

Bearings
| Pump side motor bearing | 6203 ZZ |
| Opposite side motor bearing | 6203 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |



