3CR 80 - 0.60 HP three-phase multi-impeller centrifugal electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 40 m. Motor 0.45 Kw (0.60 HP).
The 3CR 80 centrifugal electric pump from the 2-5CR series by Pedrollo stands out for its reliability and silence.
These features make it ideal for use in the domestic and civil sector.
Particularly for activities such as water distribution in conjunction with small or medium pressure tanks, for irrigation of vegetable gardens or gardens.
The 3CR 80 can pump clean water and liquids that are chemically non-aggressive for the components.
The pump body, cover and impellers are made of AISI 304 stainless steel and the motor shaft is made of AISI 431 stainless steel.
- Motor connection
- THREE-PHASE
- Power (Kw)
- 0.45
- Power (HP)
- 0.60
- Absorption at 230V (A)
- 2.5
- Current consumption at 400V (A)
- 1.5
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- AISI 304 stainless steel
- Impeller
- Noryl
- Number of impellers
- 3
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 5
- Max. head (m.)
- 40
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 18.2
- Width (cm)
- 18.2
- Depth (cm)
- 36.1
- Weight (Kg)
- 7.3
- Warranty (years)
- 2
Models and performances 2-5 CR
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data of the 2CR 3CR

Bearings
| Pump side motor bearing | 6202 ZZ-C3 |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | EN 1.4301 stainless steel (AISI 304) |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | EN 1.4057 stainless steel (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
