4CPm 80-I - 0.75 HP single-phase multi-impeller electric pump
Flow rate up to 80 l/min (4.8 m³/h). Head up to 50 m. 0.55 Kw (0.75 HP) motor.
The 4CPm 80-I centrifugal electric pump from the 2-5CP-I series by Pedrollo is recommended for water distribution in conjunction with small or medium-sized pressure tanks and for the irrigation of vegetable gardens or gardens.
Due to its silence and reliability, it is recommended for use in the domestic sector.
It can pump clean water and liquids that are chemically non-aggressive for the components themselves.
Pedrollo used cast iron and stainless steel for its production.
We recommend installing the 4CPm 80-I indoors or in any case in places protected from the elements to extend its life.
- Motor connection
- SINGLE-PHASE
- Power (HP)
- 0.85
- Absorption at 230V (A)
- 4.1
- Capacitor
- 14 µF 450 VL
- Suction mouth
- 1"
- Delivery mouth
- 1"
- Pump body
- Cast iron
- Impeller
- AISI 304 stainless steel
- Number of impellers
- 4
- Crankshaft
- Stainless steel EN 10088-3 1.4104
- Check valve
- No
- Degree of protection
- IP 44
- Minimum flow rate (l./min.)
- 5
- Max. flow rate (l./min.)
- 80
- Min. head (m.)
- 10
- Max. head (m.)
- 52
- Jobs
- irrigation
pressurization systems
water supply - Max. liquid temperature (°C)
- +40°C
- Height (cm)
- 17.2
- Width (cm)
- 15.8
- Depth (cm)
- 33.2
- Weight (Kg)
- 11.3
- Warranty (years)
- 2
Models and performances 2-5CPm-I
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Construction data 2CP80-I 3CP80-I 4CP80-I 3CP100-I

Bearings
| Pump side motor bearing | 6202 ZZ - C3 |
| Opposite side motor bearing | 6201 ZZ |
Shaft seal
| Type of seal | Single Mechanical Seal |
| Pump side model | AR-13 |
| LP diameter | 13 |
| Fixed ring LP | Ceramic |
| Rotating ring LP | Graphite |
| LP elastomer | NBR |
Materials
| 1.0 - Pump Body | Cast iron GJL 200 EN 1561 |
| 2.1 - Seal holder cover | EN 1.4301 stainless steel (AISI 304) |
| 3.0 - Impeller | EN 1.4301 stainless steel (AISI 304) |
| 4.0 - Pump shaft | Stainless steel EN 1.4057 (AISI 431) |
| 5.1 - Diffuser | Reinforced technopolymer |
| 5.2 - Shim Ring | POM acetal resin |
| 6.0 - Motor holder | Aluminum EN-AB 46100 |
| 6.1 - Engine cover | Aluminum EN-AB 46100 |
| 7.0 - Lantern | Aluminum EN-AB 46100 |
